If you need to send UPS/Fedex/TNT/DHL, please contact us. We need to discuss the freight with you.
The trianglelab has always been concerned about product quality.We are developing products and working hard to improve the quality.We will not abandon our reputation because of many cheap products on the market.It is believed that only high quality products can ensure the quality of your work and bring safety to your work.
Some of our products may be more expensive than others,but please believe in our quality and believe that you will not regret when you receive the goods.
The ceramic heating core is officially named CHC series.
It will be used as the core to make a variety of HOTEND assemblies.
Currently available for purchase are V6 specifications, HEMERA specifications, CR10 specifications.
New models will be added after March. That is the ultimate perfect CHC HOTEND. Stay tuned.
Ceramic heating core calendar represents:
1: The first generation of products (2015~2017)
2: Second-generation products (2019~2021)
3: The third generation of new products (2022)
As of 6 June 2022 this 12V product has been upgraded and does not require a step-down board, so you can use it with confidence
We have demonstrated various combinations of ceramic heating blocks, if you want to buy or learn more, you can click on the picture to purchase.
Trianglelab CHC(Ceramic Heating Core) V6 Hotend
*Built-in 104NT-4-R025H42G Thermal
Marlin Firmware Configuration
* 5:100K thermistor – ATC Semitec 104GT-2/104NT-4-R025H42G(Used in ParCan & J-Head) (4.7k pullup)
#define TEMP_SENSOR_0 5
ATC Semitec 10GT-2
sensor_type: ATC Semitec 104NT-4-R025H42G
Evenly heated to achieve 360° ring
Ceramic heating ring with built-in copper plated heating ring. The ceramic can
be heated evenly. Rapid heating. Realizes 360° ring heating.
High strength heat resistance
Extremely thin Heatbreak walls
for effective heat rejection
Hotend uses the V6 all meatl Heatbreak, which has a very thin throat wall. It has
a very thin throat wall and can achieve a very good heatbreak. Only very little
heat enters the Heatsink.
M6 smooth thread design.
The throat threads are tightly integrated with the copper-plated heating ring
threads to prevent consumables from leaking out.
CHC V6 hotend
Break down the product Understand each component of the product.
Wireframe display chart about CHC Heatblock
Product physical display
▉What's in the box:
Set1:CHC(Ceramic Heating Core) V6 Hotend 12V
Set2:CHC(Ceramic Heating Core) V6 Hotend 24V
Supports temperatures up to 300℃
ID09L08-60W ceramic heater power test
Controller BoardMKS BASE V1.4
Resistance at room temperature 10±1Ω 24V 57.6W MAX
Controller Boardpowervoltage24V DC
No Firmwareheater power limiting
Read the temperature from the LCD
Record the power consumption onthe Lab PSU while passing certain temperatures
Please note that the temperatures in the table are thermistor embedded in the melting zone not the actual temperatures of the heating element especially at low temperatures.
The power in the table above has been deducted from the consumption of the controller board and LCD 1.03W.
Cylindrical ceramic heaters can be optimized and symmetrically heated materials
The thermistor is directly installed in the BLOCK to obtain a more realistic temperature reading when the material comes out of the hot end
Lightweight design, suitable for fast printing
Small compression size
Compatible with any V5/V6/CR10/HEMERA/MATRIX radiator, up to 300℃ degrees Celsius