ENERGETIC Round PEI Sheet Dia 270mm Removal Spring Steel Sheet PEI Build Plate Magnetic Base for Flsun Super Racer 3D Printer
ENERGETIC is the first one who sells PEI sheets and spring steel sheet as the 3d printer surface in China.
ENERGETIC is using one very special spring steel sheet what is never rust and always flat, the quality is superb not like other sellers who is using poor quality material what is not flat and curved when heating.Donrsquot earn regrets for just saving seveal bucks as you can see other sellers are coping our flexplate even stole the description from our store directly.
You won’t buy regrets from ENERGETIC!!!
Items Included:
Spring Steel PEI flexplate(PEI is applied on steel sheet)*1 you can choose with base or no base.
Advtanges:
-
Never warp& Never rust.
-
Easy to get the first layer even for a new user
-
Flexible, Removable, stick to magnets very well
-
Suits variety of filaments, especially for PLA and ABS
-
Free clean- just flex the plate a little then take the prints off after cooled
-
Fast heater performance, less waiting time after printing.
Material:
-
100% real Ultem1000( PEI)amber color, matte surface.-0.2mm thickness – Made in Europe
-
This spring steel sheet is flat, flexible, stainless stick to magnets very well. 0.4mm thickness
-
PEI is 3m tape pre-applied, free bubbles.
-
PEI is applied on steel sheet
Important Information:
1.Recommend print temps
-
PLA – 60C
-
HTPLA – 60C
-
PETG – 70-80C
-
PCTG – 70-80C
-
ABS – 100C
2.Product Usage Guidelines
-
PETG/PCTG/TPU– If you are not careful with your 1st layer you can risk bonding the PETG/PCTG/TPU to the PEI surface. This will damage the surface. To prevent damage to the surface apply hairspray or PVA gluestick before printing PETG/PCTG/TPU on the PEI
-
Part Removal– Make sure your plate is at close to room temp (under 30C) before removing parts. If you remove when hot it more likely to damage the surface
Aftersales:
If any quality problem, free returning.
Or send a message, we will reply you within 12 hours
How to install ?
Happy Printing!!!