PEY Heatbed Double Side PET+PEI PEO + PEI Spring Steel Sheet PEI Magnetic Build Plate 180/220/235/310/350 mm for KP3S KP5 Ender 3 CR10 Build Plate For Voron 2.4
Feature :
PEO Material
Good adhersive on model,especially for PLA;
Beautiful patern on model;
High temperature resistant;
After our extensive testing, we recommend PEO side to print PLA and TPU and PETG.
PEI side print PLA /PETG/PC/ABS /TPU /Nylon etc.
Aplication
1. 220x220mm for:
Anet A8 / Wanhao Duplicator i3/Monoprice Maker or other similarly sized hotbed.
2. 235x235mm for
Ender 3/ Ender 3 Pro/ Ender 3S/ Ender 3 v2/
CR 20/CR 20 Pro/Ender 5 / Ender 5 Pro or other similarly sized hotbed
3. 310x310mm for
Artillery SW-X1 /SW-X2/CR-10/CR-10S
/Tevo Tornado/ Nereus/Anet A8 Plus/E12 or other heated beds of the same size
4.350x350mm For Voron 2.4
5. Size: 241mm*253.8mm (9.49*9.99inch)
Comopatible with : For Prusa i3 Mk3+
6. Size: 214*275mm (8.43*10.83inch)
Applicable with Flying Bear Ghost 5
7. Size:230mm*257mm
Applicable with Flying Bear Ghost 6
Advantage:
1. Double-sided printing, convenient and practical
2, High temperature resistance, scratch resistance, no deformation
3. No glue, easy to use
4. Anti-warping and strong stickiness
5, Stainless spring steel, good flatness
6. The printed model can be removed without the help of other tools, can be bent and returned to a flat state, no loss mode
7. Easy to clean, just wipe it off with a wet tissue or alcohol before printing
Instructions:
1. For the first printing, it must be leveled (the distance between the nozzle and the hot bed is generally A4 paper thickness)
2. Tear off the adhesive on the base of the magnetic sticker and stick it on the hot bed platform, pay attention to be flat and do not leave air bubbles
3. Adsorb the PEI side or the PEO side spring steel plate on the magnetic base
4. Start printing, the temperature of the hot bed can be set to 40°C-80°C according to the actual situation (do not exceed 80°C)
5. Take off the printing surface and bend it gently to achieve easy demoulding
Packing list
Option 1:
PEO+PEI printing surface with magnetic base
PET+PEI printing surface with magnetic base
PEI+PEI printing surface with magnetic base
Option 2:
PEO+PEI printing surface without magnetic base
PET+PEI printing surface without magnetic base
PEI+PEI printing surface without magnetic base
KINGROON 3D Printer Heatbed Double Side PET+PEI PEO + PEI Spring Steel Sheet PEI Magnetic Build Plate 180/220/235/310/350 mm for KP3S KP5 Ender 3 CR10 Build Plate For Voron 2.4
Feature :
PEO Material
Good adhersive on model,especially for PLA;
Beautiful patern on model;
High temperature resistant;
After our extensive testing, we recommend PEO side to print PLA and TPU and PETG.
PEI side print PLA /PETG/PC/ABS /TPU /Nylon etc.
Aplication
1. 220x220mm for:
Anet A8 / Wanhao Duplicator i3/Monoprice Maker or other similarly sized hotbed.
2. 235x235mm for
Ender 3/ Ender 3 Pro/ Ender 3S/ Ender 3 v2/
CR 20/CR 20 Pro/Ender 5 / Ender 5 Pro or other similarly sized hotbed
3. 310x310mm for
Artillery SW-X1 /SW-X2/CR-10/CR-10S
/Tevo Tornado/ Nereus/Anet A8 Plus/E12 or other heated beds of the same size
4.350x350mm For Voron 2.4
5. Size: 241mm*253.8mm (9.49*9.99inch)
Comopatible with : For Prusa i3 Mk3+
6. Size: 214*275mm (8.43*10.83inch)
Applicable with Flying Bear Ghost 5
7. Size:230mm*257mm
Applicable with Flying Bear Ghost 6
Advantage:
1. Double-sided printing, convenient and practical
2, High temperature resistance, scratch resistance, no deformation
3. No glue, easy to use
4. Anti-warping and strong stickiness
5, Stainless spring steel, good flatness
6. The printed model can be removed without the help of other tools, can be bent and returned to a flat state, no loss mode
7. Easy to clean, just wipe it off with a wet tissue or alcohol before printing
Instructions:
1. For the first printing, it must be leveled (the distance between the nozzle and the hot bed is generally A4 paper thickness)
2. Tear off the adhesive on the base of the magnetic sticker and stick it on the hot bed platform, pay attention to be flat and do not leave air bubbles
3. Adsorb the PEI side or the PEO side spring steel plate on the magnetic base
4. Start printing, the temperature of the hot bed can be set to 40°C-80°C according to the actual situation (do not exceed 80°C)
5. Take off the printing surface and bend it gently to achieve easy demoulding
Packing list
Option 1:
PEO+PEI printing surface with magnetic base
PET+PEI printing surface with magnetic base
PEI+PEI printing surface with magnetic base
Option 2:
PEO+PEI printing surface without magnetic base
PET+PEI printing surface without magnetic base
PEI+PEI printing surface without magnetic base
